Next: Introduction Up: Main Previous: Main
Glossary
∆T/∆V = Slope of the torque (T) versus rotational speed
(V)
ηT = True or absolute plastic viscosity
f (G,C) = function depending on the rheometer geometry
(G) and experimental conditions (C)
CF = Correction Factor
ηmi = mortar plastic viscosity measured with the calibrated
rheometer i
ηm = as-measured plastic viscosity of the matrix or
mortar
ηTm = true or absolute plastic viscosity of the matrix or
mortar
ηc = as-measured plastic viscosity of the concrete
ηTc = the true or absolute plastic viscosity of the concrete
Next: Introduction Up: Main Previous: Main