References

[1] K. van Breugel, Simulation and formation of structure in hardening cement-based materials, Ph.D. Thesis, Delft University of Technology, 1991.

[2] D.P. Bentz, Three-dimensional computer simulation of portland cement hydration and microstructure development. J Amer Ceram Soc 80 (1) (1997) 3-21.

[3] T.C. Powers, T.L. Brownyard, Studies of the physical properties of hardened portland cement paste. Bulletin 22, Research Laboratories of the Portland Cement Association, Chicago, 1948.

[4] K.A. Snyder, D.P. Bentz, Suspended hydration, freezable water consumption, and moisture transport in cement pastes exposed to 90% relative humidity. Cem Concr Res, 34 (11) (2004) 2045-2056.

[5] J.M. Pommersheim, J.R. Clifton, Mathematical modeling of tricalcium silicate hydration. Cem Concr Res 9 (1979) 765-770.

[6] T. Knudsen, The dispersion model for hydration of portland cement 1. General concepts, Cem Concr Res 14 (1984) 622-630.

[7] B. Osbaeck, V. Johansen, Particle size distribution and rate of strength development of portland cement. J Am Ceram Soc 72 (2) (1989) 197-201.

[8] M. Avrami, Kinetics of phase change I. General theory. J Chem Phys 7 (1939) 1103-1112.

[9] G.S. Wojcik, J.L. Plawsky, D.R. Fitzjarrald, The utility of a bimolecular expression to describe heat generation and temperatures in curing class HP concrete. Cem Concr Res 31 (2001) 1847-1858.

[10] W.E. Boyce, R.C. DiPrima, Elementary Differential Equations, Wiley & Sons, New York, 1977.

[11] D.P. Bentz, K.A. Snyder, P.E. Stutzman, "Microstructural Modelling of Self-Desiccation During Hydration,"in Report TVBM-3075 Self-Desiccation and Its Importance in Concrete Technology, Eds. B. Persson and G. Fagerlund, Lund University, Lund, Sweden, 132-140, 1997.

[12] Cement and Concrete Reference Laboratory, "Cement and Concrete Reference Laboratory Proficiency Sample Program: Final Report on Portland Cement Proficiency Samples Number 151 and 152," Gaithersburg, MD, April 2004.

[13] D.P. Bentz, Replacement of "coarse" cement particles by inert fillers in low w/c ratio concretes II: Experimental validation. Cem Concr Res, 35 (1) (2004) 185-188.

[14] L. Molina, On predicting the influence of curing conditions on the degree of hydration. CBI Report 5:92, Swedish Cement and Concrete Research Institute, Stockholm, 1992.

[15] V. Bonavetti, H. Donza, G. Menéndez, O. Cabrera, E.F. Irassar, Limestone filler cement in low w/c concrete : A rational use of energy. Cem Concr Res 33 (2003) 865-871.

[16] X.P. Feng, E.J. Garboczi, D.P. Bentz, P.E. Stutzman, T.O. Mason, Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure. Cem Concr Res 34 (10)(2004) 1787-1793.

[17] P. Halamickova, The influence of sand content on the microstructure development and transport properties of mortars. M.S. Thesis, University of Toronto (1993).

[18] Cement and Concrete Reference Laboratory, "Cement and Concrete Reference Laboratory Proficiency Sample Program: Final Report on Portland Cement Proficiency Samples Number 115 and 116," Gaithersburg, MD, March 1995.

[19] A.J. Allen, J.C. McLaughlin, D.A. Neumann, R.A. Livingston, In-situ quasi-elastic scattering characterization of particle size effects on the hydration of tricalcium silicate. submitted to Cem Concr Res, 2004.

[20] P. Hawkins, P. Tennis, R. Detwiler, "The use of limestone in Portland cement: A state-of-the-art review," EB227, Portland Cement Association, Skokie, IL, 2003 44 pp.

[21] D.P. Bentz, Influence of silica fume on diffusivity in cement-based materials II. Multi-scale modeling of concrete diffusivity. Cem Concr Res 30 (7) (2000) 1121-1129.