[1] Kapila, D., Falkowsky, J., and Plawsky, J.L., 'Thermal Effects During the Curing of Concrete Pavements', ACI Materials Journal 94 (2) (1997) 119-128.

[2] Bentz, D.P., 'A Computer Model to Predict the Surface Temperature and Time-of-Wetness of Concrete Pavements and Bridge Decks', NISTIR 6551 (2000).

[3] Waller, V., De Larrard, F., and Roussel, P., 'Modelling the Temperature Rise in Massive HPC Structures', in 4th International Symposium on Utilization of High-Strength/High-Performance Concrete (RILEM, Paris, 1996) 415-421.

[4] McCullough, B.F. and Rasmussen, R.O., 'Fast-Track Paving: Concrete Temperature Control and Traffic Opening Criteria for Bonded Concrete Overlays', FHWA-RD-98-167 (1999).

[5] De Schutter, G. and Taerwe, L., 'Specific Heat and Thermal Diffusivity of Hardening Concrete', Magazine of Concrete Research 47 (172) (1995) 203-208.

[6] Bouguerra, A., Laurent, J.P., Goual, M.S., and Queneudec, M., 'The Measurement of the Thermal Conductivity of Solid Aggregates Using the Transient Plane Source Technique', Journal of Physics D: Applied Physics 30 (1997) 2900-2904.

[7] Kim, K.-H., Jeon, S.-E., Kim, J.-K., and Yang, S., 'An Experimental Study on Thermal Conductivity of Concrete', Cement and Concrete Research 33 (2003) 363-371.

[8] Xu, Y. and Chung, D.D.L., 'Effect of Sand Addition on the Specific Heat and Thermal Conductivity of Cement', Cement and Concrete Research 30 (2000) 59-61.

[9] Demirboga, R. and Gul, R., 'The Effects of Expanded Perlite Aggregate, Silica Fume, and Fly Ash on the Thermal Conductivity of Lightweight Concrete', Cement and Concrete Research 33 (2003) 723-727.

[10] Gibbon, G.J. and Ballim, Y., 'Determination of the Thermal Conductivity of Concrete During the Early Stages of Hydration', Magazine of Concrete Research 50 (3) (1998) 229-235.

[11] Khan, A.A., Cook, W.D., and Mitchell, D., 'Thermal Properties and Transient Thermal Analysis of Structural Members during Hydration', ACI Materials Journal 95 (3) (1998) 293-303.

[12] Mounanga, P., Khelidj, A., and Bastian, G., 'Experimental Study and Modelling Approaches for the Thermal Conductivity Evolution of Hydrating Cement Paste', Advances in Cement Research 16 (3) (2004) 95-103.

[13] Morabito, P., 'Thermal Properties of Concrete: Variations with the Temperature and During the Hydration Phase', BE96-3843/2001:18-4 (2001).

[14] Demirboga, R., 'Influence of Mineral Admixtures on Thermal Conductivity and Compressive Strength of Mortar', Energy and Buildings 35 (2) (2003) 189-192.

[15] Hansen, P.F., Hansen, J., Hougaard, K., and Pedersen, E.J., 'Thermal Properties of Hardening Cement Paste', in Proceedings of RILEM International Conference on Concrete at Early Ages (RILEM, Paris, 1982) 23-36.

[16] Cement and Concrete Reference Laboratory, 'Cement and Concrete Reference Laboratory Proficiency Sample Program: Final Report on Portland Cement Proficiency Samples Number 151 and 152', (2004).

[17] Gustafsson, S.E., 'Transient Plane Source Techniques for Thermal Conductivity and Thermal Diffusivity Measurements of Solid Materials', Review of Scientific Instruments 62 (3) (1991) 797-804.

[18] Log, T. and Gustafsson, S.E., 'Transient Plane Source (TPS) Technique for Measuring Thermal Transport Properties of Building Materials', Fire and Materials 19 (1995) 43-49.

[19] He, Y., 'Rapid Thermal Conductivity Measurement with a Hot Disk Sensor Part 1. Theoretical Considerations', Thermochimica Acta 436 (2005) 122-129.

[20] Bentz, D.P., 'Three-dimensional computer simulation of cement hydration and microstructure development', Journal of the American Ceramic Society 80 (1) (1997) 3-21.

[21] Molina, L., 'On predicting the influence of curing conditions on the degree of hydration', CBI Report 5:92 (1992).

[22] Holman, J.P., 'Heat Transfer' (McGraw-Hill, New York, 1981).

[23] Todd, S.S., 'Low-Temperature Heat Capacities and Entropies at 298.16 K of Crystalline Calcium Orthosilicate, Zinc Orthosilicate, and Tricalcium Silicate', Journal of the American Chemical Society 73 (1951) 3277-3278.

[24] 'CRC Handbook of Chemistry and Physics' (CRC Press, Boca Raton, FL, 1987).

[25] Thomas, J.J., Jennings, H.M., and Allen, A.J., 'The Surface Area of Cement Paste as Measured by Neutron Scattering - Evidence for Two C-S-H Morphologies', Cement and Concrete Research 28 (6) (1998) 897-905.

[26] Snyder, K.A. and Bentz, D.P., 'Suspended Hydration and Loss of Freezable Water in Cement Pastes Exposed to 90 % Relative Humidity', Cement and Concrete Research 34 (2004) 2045-2056.

[27] Bentz, D.P., 'Modelling Cement Microstructure: Pixels, Particles, and Property Prediction', Materials and Structures 32 (1999) 187-195.

[28] Bentz, D.P. and Stutzman, P.E., 'Curing, Hydration, and Microstructure of Cement Pastes', accepted by ACI Materials Journal (2005).

[29] Hashin, Z. and Shtrikman, S., 'A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials', Journal of Applied Physics 33 (1962) 3125-3131.

[30] Horai, K., 'Thermal Conductivity of Rock-Forming Minerals', Journal of Geophysical Research 76 (5) (1971) 1278-1308.

[31] Vosteen, H.-D. and Schellschmidt, R., 'Influence of Temperature on Thermal Conductivity, Thermal Capacity, and Thermal Diffusivity for Different Types of Rocks', Physics and Chemistry of the Earth 28 (2003) 499-509.


[1] Certain commercial products are identified in this paper to specify the materials used and procedures employed.  In no case does such identification imply endorsement by the National Institute of Standards and Technology, nor does it indicate that the products are necessarily the best available for the purpose.


Up: Main Previous: Conclusions