Bibliography

1

H.F.W. Taylor, Cement Chemistry, Academic Press, New York, 1990.

2

Standard Practice for Curing Concrete (ACI 308-92), In: ACI Manual of Practice, American Concrete Institute, Detroit, MI, 2001, p. 308-1.

3

T.C. Powers, A discussion of cement hydration in relation to the curing of concrete, Proc. Highway Res. Board 27 (1947) 178-188.

4

G.R. Gause and J. Tucker, Jr., Method for determining the moisture condition in hardened concrete, J. Res. NBS 25 (1940) 403-416.

5

A.W. Adamson, Physical Chemistry of Surfaces, Wiley Interscience, Fifth Edition, New York, 1990.

6

L.J. Parrott, D.C. Killoh, and R.G. Patel, Cement hydration under partially saturated curing conditions, In: 8th International Congress on the Chemistry of Cement, Rio de Janeiro, 1986, pp. 46-50.

7

D.H. Bager, Effect of curing on the pore structure and permeability of cement-flyash mortars, In: Proceedings of the RILEM Seminar on the Durability of Concrete Structures Under Normal Outdoor Exposure, Hannover, Germany, 1984, pp. 102-115.

8

R.K. Haupt, Final Report: Portland Cement Proficiency Samples Number 115 and Number 116, Cement and Concrete Reference Laboratory, Gaithersburg, MD, 1995.

9

S. Hasegawa and J.W. Little, The NBS two-pressure humidity generator: Mark 2, J. Res. NBS 81A (1977) 81-88.

10

T.C. Powers, The nonevaporable water content of hardened portland-cement paste - Its significance for concrete research and its method of determination, ASTM Bulletin No. 158 (1949) 68-76.

11

F. Radjy, E.J. Sellevold, and C.W. Richards, Effect of freezing on the dynamic mechanical response of hardened cement paste down to -60ºC, Cem. Concr. Res. 2 (1972) 697-715.

12

C. le Sage de Fontenay and E.J. Sellevold, Ice formation in hardened cement paste-I. Mature water-saturated pastes, In: Durability of Building Materials and Component (ASTM STP 691), P.J. Sereda and G.G. Litvan (Eds.) American Society for Testing and Materials, 1980, pp. 425-438.

13

A. Damasceni, L. Dei, E. Fratini, F. Ridi, S.-H. Chen, and P. Baglioni, A novel approach based on differential scanning calorimetry applied to the study of tricalcium silicate hydration kinetics, J. Phys. Chem. B 106 (2002) 11572-11578.

14

C.L. Jackson and G.B. McKenna, The melting behavior of organic materials confined in porous solids, J. Chem. Phys. 93 (1990) 9002-9011.

15

E.J. Sellevold and D.H. Bager, Low temperature calorimetry as a pore structure probe, In: 7th International Congress on the Chemistry of Cement, Paris, Vol. 4, 1981, pp. 394-399.

16

T. Knudsen, 7th International Congress on the Chemistry of Cement, Paris, Vol 2, 170-175, 1981.

17

M. Geiker, Studies of Portland Cement Hydration by Measurements of Chemical Shrinkage and Systematic Evaluation of Hydration Curves by Means of the Dispersion Model, Ph. D Dissertation, Technical University of Denmark, pp. 259, 1983.

18

N.J. Carino, Applicability of the Maturity Method to High-Performance Concrete (NISTIR 4819), National Institute of Standards and Technology, U.S. Department of Commerce, Gaithersburg, MD, pp. 62, May 1992.

19

D.P. Bentz, K.A. Snyder, and P.E. Stutzman, Hydration of portland cement: The effects of curing conditions, In: Proceedings of the 10th International Conference on Cement Chemistry (Vol. 2), H. Justnes (Ed.), Sweden, 1997, Paper 2::078.

20

D.P. Bentz, K.A. Snyder, and P.E. Stutzman, Microstructural modelling of self-desiccation during hydration, In: Self-Desiccation and Its Importance in Concrete Technology, B. Persson and G. Fagerlund (Eds.), Proceedings of an International Research Seminar in Lund, 1997, pp. 132-140. (PDF Version)

21

T.C. Powers, L.E. Copeland, and H.M. Mann, Capillary continuity or discontinuity in cement paste, PCA Bulletin No. 10 (1959) 2-12.

22

D.P. Bentz and E.J. Garboczi, Percolation of phases in a three-dimensional cement paste microstructural model, Cem. Concr. Res. 21 (1991) 325-344.

23

E.J. Garboczi and D.P. Bentz, The effect of statistical fluctuation, finite size error, and digital resolution on the phase percolation and transport properties of the NIST cement hydration model, Cem. Concr. Res. 31 (2001) 1501-1514.

24

J.F. Young and W. Hansen, Volume relationships for C-S-H formation based on hydration stoichiometries, In: Microstructural Development During Hydration of Cement, L.J. Struble and P.W. Brown (Eds.), Mat. Res. Soc. Symp. Proc. vol. 85, 1987, pp. 313-322.

25

G. Fagerlund, Determination of pore-size distribution from freezing-point depression, Mater. Construct. 6 (1973) 215-225.

26

D.H. Bager and E.J. Sellevold, Ice formation in hardened cement paste, Part 1 - Room temperature cured pastes with variable moisture contents, Cem. Concr. Res. 16 (1986) 709-720.

27

D.H. Bager and E.J. Sellevold, Ice formation in hardened cement paste, Part 2 - Drying and resaturation on room temperature cured pastes, Cem. Concr. Res. 16 (1986) 835-844.

28

H.M. Jennings, A model for the microstructure of calcium silicate hydrate in cement paste, Cem. Concr. Res. 30 (2000) 101-116.

29

H.M. Jennings and P.D. Tennis, Model for developing microstructure in portland cement pastes, J. Am. Ceram. Soc. 77 (1994) 3161-3172; and correction: J. Am. Ceram. Soc. 78 (1995) 2575.

30

P.D. Tennis and H.M. Jennings, A model for two types of calcium silicate hydrate in the microstructure of portland cement pastes, Cem. Concr. Res. 30 (2000) 855-863.

31

R.M.E. Valckenborg, L. Pel, and K. Kopinga, Combined NMR cryoporometry and relaxometry, J. Phys. D: Appl. Phys. 35 (2002) 249-256.

32

A.J. Katz and A.H. Thompson, Quantitative prediction of permeability in porous rocks, Phys. Rev. B 34 (1986) 8179-8181.

33

M. Rossler and I. Odler, Investigations on the relationships betweeen porosity, structure and strength of hydrated portland cement pastes 1. Effect of porosity, Cem. Concr. Res. 15 (1985) 320-330.

34

D.E. Macphee, E.E. Lachowski, and F.P. Glasser, Polymerization effects in C-S-H: Implications for portland cement hydration, Adv. Cem. Res. 1 (1988) 131-137.