7. References

1. Bentz, D.P., 'Influence of water-to-cement ratio on hydration kinetics: Simple models based on spatial considerations', submitted to Cem. Concr. Res. 2004.

2. Bentz, D.P., Garboczi, E.J., Haecker, C.J., and Jensen, O.M., 'Effects of cement particle size distribution on performance properties of cement-based materials', Cem. Concr. Res. 29 (1999) 1663-1671.

3. Knudsen T., 'The dispersion model for hydration of portland cement 1. General concepts', Cem. Concr. Res. 14 (1984) 622-630.

4. Osbaeck B., and Johansen V., 'Particle size distribution and rate of strength development of portland cement', J. Amer. Ceram. Soc. 72 (2) (1989) 197-201.

5. Bentz, D.P., Garboczi, E.J., and Martys, N.S., 'Application of digital-image-based models to microstructure, transport properties, and degradation of cement-based materials', in 'The Modelling of Microstructure and Its Potential for Studying Transport Properties and Durability', Eds. H.M. Jennings et al. (Kluwer Academic Publishers, 1996) 167-186.

6. Bentz, D.P., Mizell, S., Satterfield, S., Devaney, J., George, W., Ketcham, P., Graham, J., Porterfield, J., Quenard, D., Vallee, F., Sallee, H., Boller, E., and Baruchel, J., 'The visible cement data set', J. Res. NIST 107 (2) (2002) 137-148.

7. Bentz, D.P., 'Quantitative comparison of real and CEMHYD3D model microstructures using correlation functions', submitted to Cem. Concr. Res. 2004.

8. Powers, T.C., 'Capillary continuity or discontinuity in cement paste', PCA Bulletin 10 (1959) 2-12.

9. Cement and Concrete Reference Laboratory, 'Cement and concrete reference laboratory proficiency sample program: Final report on portland cement proficiency samples number 139 and 140', Gaithersburg, MD, March 2001.

10. Cement and Concrete Reference Laboratory, 'Cement and concrete reference laboratory proficiency sample program: Final report on portland cement proficiency samples number 151 and 152', Gaithersburg, MD, April 2004, available at http://www.ccrl.us.

11. Bentz, D.P., and Stutzman, P.E., 'Curing, hydration, and microstructure of cement paste', submitted to ACI Mater. J. 2005.

12. Bentz, D.P., 'Modeling the influence of limestone filler on cement hydration using CEMHYD3D', submitted to Cem. Concr. Composites 2005.

13. Bentz, D.P., 'Influence of alkalis on porosity percolation in hydrating cement pastes', submitted to Cem. Concr. Res. 2005.

14. ASTM C191-04b, 'Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle,' ASTM Annual Book of Standards, Vol. 04.01 Cement; Lime; Gypsum (American Society for Testing and Materials, West Conshohocken, PA, 2004).

15. Amziane, S., and Ferraris, C.F., 'Monitoring of setting evolution of cementitious materials by measurements of rheological properties and hydraulic pressure variations', submitted to Mag. Concr. Res. 2004.

16. Amziane, S., and Ferraris, C.F., 'SCC evolution of formwork hydraulic pressure and rheological properties', ACI Proceedings (New York), 2005.

17. Amziane, S., and Ferraris, C.F., 'Caractérisation de la prise des matériaux cimentaires', Proc. of the GFR convention, Mulhouse (France) October 2004 (in French).

18. Bentz D.P., 'CEMHYD3D: A three-dimensional cement hydration and microstructure development modelling package. Version 2.0', NISTIR 6485, U.S. Department of Commerce, April 2000.

19. Haecker, C.J., Bentz, D.P., Feng, X.P., and Stutzman, P.E., 'Prediction of cement physical properties by virtual testing', Cem. Inter. 1 (3) (2003) 86-92.

20. Princigallo, A., Lura, P., van Breugel, K., and Levita, G., 'Early development of properties in a cement paste: A numerical and experimental study', Cem. Concr. Res. 33 (2003) 1013-1020.

21. Geiker, M., 'Studies of portland cement hydration: Measurement of chemical shrinkage and a systematic evaluation of hydration curves by means of the dispersion model', Ph.D. Thesis, Technical University of Denmark, Lyngby, Denmark, 1983.

22. Bager, D.H., and Sellevold, E.J., 'Ice formation in hardened cement paste, Part II- Drying and resaturation on room temperature cured pastes', Cem. Concr. Res. 16 (1986) 835-844.

23. Villadsen, J., 'Hærdetemperaturens indflydelse på hærdnet cementpastas porestruktur: Projektrapport', The Technical University of Denmark, Lyngby, Denmark, 1989.

24. Snyder, K.A., and Bentz, D.P., 'Suspended hydration and loss of freezable water in cement pastes exposed to 90% relative humidity', Cem. Concr. Res. 34 (11) (2004) 2045-2056.

25. Bentz, D.P., Jensen, O.M., Hansen, K.K., Oleson, J.F., Stang, H., and Haecker, C.J., 'Influence of cement particle size distribution on early age autogenous strains and stresses in cement-based materials', J. Amer. Ceram. Soc. 84 (1) (2001) 129-135.

26. Swayze, M.A., 'Early concrete volume changes and their control', J. ACI 13 (5) (1942) 425-440.

27. Powers, T.C., 'A discussion of cement hydration in relation to the curing of concrete', Proc. Highway Res. Board 27 (1947) 178-188.

28. Richardson I.G., 'Tobermorite/jennite− and tobermorite/calcium hydroxide-based models for the structure of C-S-H: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, portland cement, and blends of portland cement with blast-furnace slag, metakaolin, or silica fume', Cem. Concr. Res. 34 (2004) 1733-1777.

29. Bentz, D.P., Jensen, O.M., Coats, A.M., and Glasser, F.P., 'Influence of silica fume on diffusivity in cement-based materials. I. Experimental and computer modeling studies on cement pastes', Cem. Concr. Res. 30 (2000) 953-962.

30. Nonat, A., 'The structure and stoichiometry of C-S-H', Cem. Concr. Res. 34 (2004) 1521-1528.

31. Cong, X., and Kirkpatrick, R.J., '29Si MAS NMR study of the structure of calcium silicate hydrate', Adv. Cem.-Based Mater. 3 (1996) 144-156.