[1] Lura, P., van Breugel, K., and Maruyama, L., Effect of Curing Temperature and Type of Cement on Early-age Shrinkage of High Performance Concrete, Cem. Concr. Res., 31 (12) (2001) 1867-1872.
[2] Shah, S.P., Weiss, W.J., and Yang, W., Shrinkage Cracking - Can It Be Prevented?, Concr. Inter. 20 (4) (1998) 51-55.
[3] Bentz, D.P., and Jensen, O.M., Mitigation Strategies for Autogenous Shrinkage Cracking, Cem. Concr. Comp. 26 (6) 2004 677-685.
[4] Bentz, D.P., Geiker, M.R., and Hansen, K.K., Shrinkage-reducing Admixtures and Early-age Desiccation in Cement Pastes and Mortars, Cem. Concr. Res. 31 (7) (2001) 1075-1085.
[5] Weber, S., and Reinhardt, H.W., A New Generation of High Performance Concrete: Concrete with Autogenous Curing, Adv. Cem.-Based Mater. 6 (1997) 59-68.
[6] van Breugel, K., and Lura, P., Effect of Initial Moisture Content and Particle Size Distribution of Lightweight Aggregates on Autogenous Deformation, in ‘Proceedings of the Second International Symposium on Structural Lightweight Aggregate Concrete’, Eds. S. Helland, I. Holand, and S. Smeplass (2000) 453-462.
[7] Bentur, A., Igarashi, S., and Kovler, K., Prevention of Autogenous Shrinkage in High Strength Concrete by Internal Curing Using Wet Lightweight Aggregates, Cem. Concr. Res. 31 (11) (2001) 1587-1591.
[8] Jensen, O.M., and Hansen, P.F., Water-entrained Cement-based Materials I. Principle and Theoretical Background, Cem. Concr. Res. 31 (2001) 647-654.
[9] Jensen, O.M., and Hansen, P.F., Water-entrained Cement-based Materials II. Experimental Observations, Cem. Concr. Res. 32 (6) (2002) 973-978.
[10] DIN EN 196: Pruefverfahren fuer Zement. (Deutsches Institut fuer Normung e.V., Berlin) 1990-1995.
[11] Jensen, O.M., and Hansen, P.F., A Dilatometer for Measuring Autogeneous Deformation in Hardening Portland Cement Paste, Mater. Struct. 28 (1995) 406-409.
[12] Jensen, O.M., and Hansen, P.F., Autogeneous Deformation and Change of Relative Humidity in Silica Fume Modified Cement Paste, ACI Mater. J. 93 (6) (1996) 539-543.
[13] Jensen, O.M., and Hansen, P.F, Influence of Temperature on Autogenous Deformation and RH-change in Hardening Cement Paste, Cem. Concr. Res. 29 (4) (1999) 567-575)
[14] Alberty, R.A., and Daniels, F., Physical Chemistry (John Wiley & Sons, New York, 1980).
[15] Bentz, D.P, Hansen, K.K., Madsen, H.D., Vallee, F., and Griesel, E.J., Drying/hydration in Cement Pastes During Curing, Mater. Struct. 34 (2000) 557-565.
[16] MacKenzie, J.K., The Elastic Constants of a Solid Containing Spherical Holes, Proc. Phys. Soc. A 224 (1950) 526-544.
[17] Bentz, D.P., Garboczi, E.J., and Quenard, D.A., Modelling Drying Shrinkage in Reconstructed Porous Materials: Application to Porous Vycor Glass, Modelling Simul. Mater. Sci. Eng. 6 (1998) 211-236.
[18] Bentz, D.P., and Snyder, K.A., Protected Paste Volume in Concrete: Extension to Internal Curing Using Saturated Lightweight Fine Aggregate, Cem. Conc. Res. 29 (1999) 1863-1867.
[19] Bentz, D.P., Garboczi, E.J., and Snyder, K.A., A Hard Core/Soft Shell Microstructural Model for Studying Percolation and Transport in Three-Dimensional Composite Media, NISTIR 6265, U.S. Department of Commerce, January 1999.
[20] Powers, T.C., A Discussion of Cement Hydration in Relation to the Curing of Concrete, Proc. Highway Res. Board 27 (1947) 178-188.
[21] Parrott, L.J., Killoh, D.C., and Patel, R.G., Cement Hydration Under Partially Saturated Curing Conditions, in Proceedings of the 8th International Congress on the Chemistry of Cement, Rio de Janeiro, Vol. III (1986) 46-50.
[22] Snyder, K.A., and Bentz, D.P., Suspended Hydration and Loss of Freezable Water in Cement Pastes Exposed to 90 % Relative Humidity, Cement and Concrete Research, 34 (2004) 2045-2056.
[23] Neville, A., Properties of Concrete, 4th edition (John Wiley & Sons, New York, 1996).