[1] Bentz, D.P., Guide to Using CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package, NISTIR 5977, U.S. Department of Commerce, February, 1997 (available from National Technical Information Service).
[2] Bentz, D.P., CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package. Version 2.0, NISTIR 6485, U.S. Department of Commerce, April, 2000 (available from National Technical Information Service).
[3] Stauffer, D., Introduction to Percolation Theory (Taylor and Francis, London, 1985).
[4] Gutteridge, W.A., and Dalziel, J.A., "Filler Cement: The Effect of the Secondary Component on the Hydration of Portland Cement. Part I. A Fine Non-Hydraulic Filler," Cem Concr Res, Vol. 20, 778-782 (1990).
[5] Taylor, H.F.W., "A Method for Predicting Alkali Ion Concentrations in Cement Pore Solutions," Adv Cem Res, Vol. 1 (1), 5-16 (1987).
[6] Samson, E., Lemaire, G., Marchand, J., Beaudoin, J.J., "Modeling Chemical Activity Effects in Strong Ionic Solutions," Comp Mater Sci, Vol. 15, 285-294 (1999).
[7] van Eijk, R.J., and Brouwers, H.J.H., "Prediction of Hydroxyl Concentrations in Cement Pore Water Using a Numerical Cement Hydration Model," Cem Concr Res, Vol. 30, 1801-1806 (2000).
[8] Snyder, K.A., Feng, X., Keen, B.D., and Mason, T.O., "Estimating the Electrical Conductivity of Cement Paste Pore Solutions from OH-, K+, and Na+ Concentrations," Cem Concr Res, Vol. 33 (6), 793-798 (2003).
[9] Reardon, E.J., "An Ion Model for the Determination of Chemical Equilibria in Cement/Water Systems," Cem Concr Res, Vol. 20 (2), 175-192 (1990).
[10] Gartner, E.J., Tang, F.J., and Weiss, S.J., "Saturation Factors for Calcium Hydroxide and Calcium Sulfates in Fresh Portland Cement Pastes," J Amer Ceram Soc, Vol. 68 (12), 667-673 (1985).
[11] Taylor, H.F.W., Cement Chemistry, 2nd edition (Thomas Telford, London, 1997).
[12] Press, W.H., Flannery, B.P., Teukolsky, S.A., and Vetterling, W.T., Numerical Recipes in C: The Art of Scientific Computing (Cambridge University Press, Cambridge, 1990).
[13] Haecker, C.J., Bentz, D.P., Feng, X.P., and Stutzman, P.E., "Prediction of Cement Physical Properties by Virtual Testing," Cem Inter, Vol. 1 (3), 86-92 (2003).
[14] Hawkins, P., Tennis, P., and Detwiler, R., "The Use of Limestone in Portland Cement: A State-of-the-Art Review," EB227 (Portland Cement Association, Skokie, IL, 2003) 44 pp.
[15] Klemm, W.A., and Adams, L.D., "An Investigation of the Formation of Carboaluminates," in: P. Klieger, R.D. Hooton (Eds.), Carbonate Additions to Cement, ASTM STP 1064 (American Society for Testing and Materials, Philadelphia, PA, 1990) pp. 60-72.
[16] Kuzel, H.-J., and Pollmann, H. "Hydration of C3A in the Presence of Ca(OH)2, CaSO4·2H2O and CaCO3," Cem Concr Res, Vol. 21, 885-895 (1991).
[17] Bonavetti, V.L., Rahhal, V.F., and Irassar, E.F., "Studies on the Carboaluminate Formation in Limestone Filler-Blended Cements," Cem Concr Res, Vol. 31, 853-859 (2001).
[18] Kakali, G., Tsivilis, S., Aggeli, E., and Bati, M. "Hydration Products of C3A, C3S and Portland Cement in the Presence of CaCO3," Cem Concr Res, Vol. 30, 1073-1077 (2000).
[19] Wang, S.-D., "Alkali-Activated Slag: Hydration Process and Development of Microstructure," Adv Cem Res, Vol. 12 (4), 163-172 (2000).
[20] Richardson, J.R., Biernacki, J.J., Stutzman, P.E., and Bentz, D.P., "Stoichiometry of Slag Hydration in the Presence of Calcium Hydroxide," J Amer Ceram Soc, Vol. 85 (4), 947-953 (2002). (PDF Version)
[21] Biernacki, J.J., Richardson, J.R., Stutzman, P.E., and Bentz, D.P., "Kinetics of Slag Hydration in the Presence of Calcium Hydroxide," J Amer Ceram Soc, Vol. 85 (9), 2261-2267 (2002).
[22] Feng, X., Garboczi, E.J., Bentz, D.P., Stutzman, P.E., and Mason, T.O., "Estimation of the Degree of Hydration of Blended Cement Pastes by a Scanning Electron Microscope Point-Counting Procedure," Cem Concr Res, Vol. 34, 1787-1793 (2004).
[23] ASTM C1074-04 "Standard Practice for Estimating Concrete Strength by the Maturity Method," ASTM Annual Book of Standards, Vol. 04.02 Concrete and Aggregates (ASTM International, West Conshohocken, PA, 2004).
[24] De Schutter, G., "Hydration and Temperature Development of Concrete Made with Blast-Furnace Slag Cement," Cem Concr Res, Vol. 29, 143-149 (1999).
[25] Bentz, D.P., and Stutzman, P.E., "Curing, Hydration, and Microstructure of Cement Paste," submitted to ACI Mater J, 2005.
[26] Mori, H., Sudoh, G., Minegishi, K., and Ohta, T., "Some Properties of C-S-H Gel Formed by C3S Hydration in the Presence of Alkali," Proceedings 6th International Congress on the Chemistry of Cement, Moscow, V. 2, Supplementary Paper, Section 2, 2-12 (1974).
[27] Richardson, I.G., "Tobermite/Jennite- and Tobermorite/Calcium Hydroxide-Based Models fo the Structure of C-S-H: Applicability to Hardened Pastes of Tricalcium Silicate, β-Dicalcium Silicate, Portland Cement, and Blends of Portland Cement with Blast-Furnace Slag, Metakaolin, or Silica Fume," Cem Concr Res, Vol. 34, 1733-1777 (2004).
[28] Bentz, D.P., "Influence of Alkalis on Porosity Percolation in Hydrating Cement Pastes," submitted to Cem Concr Res, 2005.
[29] Blinc, R., Lahajnar, G., Zumer, S., and Pintar, M.M., "NMR Study of the Time Evolution of the Fractal Geometry of Cement Gels," Phys. Rev. B, Vol. 38 (4), 2873-2875 (1988).
[30] Bullard, J.W., "Modeling the Hydration Kinetics of Fine Cements: Application to CEMHYD3D," submitted to Cem Concr Res, 2004.
[31] Bentz, D.P., and Remond, S., "Incorporation of Fly Ash into a 3-D Cement Hydration Microstructure Model," NISTIR 6050, U.S. Department of Commerce, August 1997 (available from National Technical Information Service).
[32] Bentz, D.P., "A Three-Dimensional Cement Hydration and Microstructure Program. I. Hydration Rate, Heat of Hydration, and Chemical Shrinkage," NISTIR 5756, U.S. Department of Commerce, November 1995 (available from National Technical Information Service).
[33] Bentz, D.P., Waller, V., and DeLarrard, F., "Prediction of Adiabatic Temperature Rise in Conventional and High-Performance Concretes Using a 3-D Microstructural Model," Cem Concr Res, Vol. 28 (2), 285-297 (1998).
[34] Bache, H., Idorn, G.M., Nepper-Christensen, P., and Nielsen, J., "Morphology of Calcium Hydroxide in Cement Paste," in HRB Special Report 90, Symposium on Structure of Portland Cement Paste and Concrete, Highway Research Board, 154-174 (1966).
[35] Diamond, S., and Huang, J., "The ITZ in Concrete- A Different View Based on Image Analysis and SEM Observations," Cem Concr Comp, Vol. 23, 179-188 (2001).
[36] Bentz, D.P., "Three-Dimensional Computer Simulation of Cement Hydration and Microstructure Development," J Amer Ceram Soc, Vol. 80 (1), 3-21 (1997).
[37] Waller, V., DeLarrard, F., and Roussel, P., "Modelling the Temperature Rise in Massive HPC Structures," 4th International Symposium on Utilization of High-Strength/High-Performance Concrete, Paris, Paper 170, 415-421 (1996).
[38] Carino, N.J., Knab, L.I., and Clifton, J.R., "Applicability of the Maturity Method to High-Performance Concrete," NISTIR 4819, U.S. Department of Commerce, May 1992 (available from National Technical Information Service).
[39] Powers, T.C., "Physical Properties of Cement Paste," in Proceedings of the 4th International Symposium on the Chemistry of Cement, Washington, D.C., Vol. 2, Paper V-1, 577-613 (1962).
[40] ASTM C 150-04, "Standard Specification for Portland Cement," ASTM Annual Book of Standards, Vol. 04.01 Cement; Lime; Gypsum (American Society for Testing and Materials, West Conshohocken, PA, 2004).
[41] Bentz, D.P., "Modeling the Influence of Limestone Filler on Cement Hydration Using CEMHYD3D," submitted to Cem Concr Comp, 2005.
[42] Cement and Concrete Reference Laboratory, "Cement and Concrete Reference Laboratory Proficiency Sample Program: Final Report on Portland Cement Proficiency Samples Number 139 and 140," Gaithersburg, MD, March 2001.