[1] Geiker, M.R., Bentz, D.P., and Jensen, O.M., ‘Mitigating Autogenous Shrinkage by Internal Curing’, in ‘High Performance Structural Lightweight Concrete’, ACI SP 218, (American Concrete Institute, Farmington Hills 2004) 143-154.

[2] Jensen, O.M., and Hansen, P.F., ‘Water-Entrained Cement-Based Materials II: Experimental Observations’, Cem. Conc. Res., 32 (6) (2002) 973-978.

[3] Cusson, D., and Hoogeveen, T., ‘Internally-Cured High-Performance Concrete under Restrained Shrinkage and Creep’, in ‘CONCREEP 7 Workshop on Creep, Shrinkage and Durability of Concrete and Concrete Structures’ (Nantes, France, 2005) 579-584.

[4] Cusson, D., Hoogeveen, T., and Mitchell, L.D., ‘Restrained Shrinkage Testing of High-Performance Concrete Modified with Structural Lightweight Aggregate’, in ‘7th International Symposium on Utilization of High-Strength/High-Performance Concrete’ (Washington, D.C. 2005) 20 pp.

[5] Bentz, D.P., and Hansen, K.K., "Preliminary Observations of Water Movement in Cement Pastes During Curing Using X-ray Absorption," Cem. Concr. Res. 30, (2000) 1157-1168.

[6] Bentz, D.P., Hansen, K.K., Madsen, H.D., Vallee, F.A., and Griesel, E.J., ‘Drying/Hydration in Cement Pastes During Curing’, Mater. Struct. 34 (2001) 557-565.

[7] Bentz, D.P., Hansen, K.K., and Geiker, M.R., ‘Shrinkage-Reducing Admixtures and Early Age Desiccation in Cement Pastes and Mortars’, Cem. Concr. Res., 31 (7) (2001) 1075-1085.

[8] Lura, P., Bentz, D.P., Lange, D.A., Kovler, K., Bentur, A., and van Breugel, K., ‘Measurement of Water Transport from Saturated Pumice Aggregates to Hardening Cement Paste’, accepted by Mater. Struc. (2006).

[9] Bentz, D.P, Mizell, S., Satterfield, S., Devaney, J., George, W., Ketcham, P., Graham, J., Porterfield, J., Quenard, D., Vallee, F., Sallee, H., Boller, E., and Baruchel, J., ‘The Visible Cement Data Set’, J. Res. NIST 107 (2) (2002) 137-148.

[10] Landis, E.N., Zhang, T., Nagy, E.N., Nagy, G., and Franklin, W.R., ‘Cracking, Damage, and Fracture in Four Dimensions’, accepted by Mater. Struct. (2006).

[11] Bentz, D.P., Halleck, P.M., Grader, A.S., and Roberts, J.W., ‘Direct Observation of Water Movement during Internal Curing Using X-ray Microtomography’, to appear in Concr. Inter., August 2006.

[12] Bentz, D.P., Lura, P., and Roberts, J.W., ‘Mixture Proportioning for Internal Curing’, Concr. Inter. 27 (2) (2005) 35-40.

[13] ASTM C1608-05, ‘Test Method for the Chemical Shrinkage of Hydraulic Cement Paste’, (ASTM International, West Conshohocken, PA, 2005).

[14] Parrott, L.J., Geiker, M., Gutteridge, W.A., and Killoh, D., ‘Monitoring Portland Cement Hydration: Comparison of Methods’, Cem. Concr. Res. 20 (1990) 919-926.

[15] Bentz, D.P., ‘Three-Dimensional Computer Simulation of Cement Hydration and Microstructure Development’, J. Amer. Ceram. Soc. 80 (1) (1997) 3-21.

[16] Bentz, D.P., ‘Capitalizing on Self-Desiccation for Autogenous Distribution of Chemical Admixtures in Concrete’, in ‘Proceedings of the 4th International Seminar on Self-Desiccation and Its Importance in Concrete Technology’ (Lund University, Lund, Sweden, 2005) 189-196.

[17] Marion, A., ‘An Introduction to Image Processing’, (Chapman and Hall, London, 1991).



Up: Main Previous: Summary