Next: Graphs for Fit of Up: Main Previous: Acknowledgments

Bibliography

1
Hill Jr., E.D., and Frohnsdorff, G.J., Cement, Concrete, and Aggregates, 15 (2), 109-118, 1993.

2
Garboczi, E.J., and Bentz, D.P., MRS Bulletin, 28 (3), 50-54, 1993.

3
Bentz, D.P., and Garboczi, E.J., "Guide to Using HYDRA3D: A Three-Dimensional Digital-Image-Based Cement Microstructural Model," NISTIR 4746, U.S. Department of Commerce, Jan. 1992.

4
Bentz, D.P., and Garboczi, E.J., "Percolation of phases in a three-dimensional cement paste microstructure model" Cement and Concrete Research, 21, 325-344, 1991.

5
Cement and Concrete Reference Laboratory Proficiency Sample Program: Final Report Portland Cement Proficiency Samples Number 115 and Number 116, Cement and Concrete Reference Laboratory, March, 1995.

6
Annual Book of ASTM Standards, Vol. 04.01. Cement; Lime; Gypsum (ASTM, Philadelphia, PA, 1992).

7
Bentz, D.P., and Stutzman, P.E., "SEM Analysis and Computer Modelling of Hydration of Portland Cement Particles," in Petrography of Cementitious Materials, edited by S.M. DeHayes and D. Stark (ASTM, Philadelphia, PA, 1994) p. 60.

8
Taylor, H.F.W., Cement Chemistry (Academic Press, London, 1990).

9
Molina, L., "On Predicting the Influence of Curing Conditions on the Degree of Hydration," CBI Report 5:92 (Swedish Cement and Concrete Research Institute, Stockholm, 1992).

10
Prosen, E.J., Brown, P.W., Frohnsdorff, G., and Davis, R.A., Cement and Concrete Research, 15, 703-710, 1985.

11
Geiker, M., "Studies of Portland Cement Hydration: Measurements of Chemical Shrinkage and a Systematic Evaluation of Hydration Curves by Means of the Dispersion Model," Ph. D. Thesis, Technical University of Denmark, 1983.

12
Tazawa, E., Miyazawa, S., and Kasai, T., Cement and Concrete Research, 2, 288-292, 1995.

13
Hua, C., Acker, P., and Erlacher, A., Bulletin Liaison Laboratoires des Ponts et Chaussees, 196, 79-89, March-April 1995.

14
Hua, C., Acker, P., and Erlacher, A., Cement and Concrete Research, 25 (7), 1457-1468, 1995.

15
Bonen, D., and Diamond, S., "Application of Image Analysis to a Comparison of Ball Mill and High Pressure Roller Mill Ground Cement," in Proceedings of the Thirteenth International Conference on Cement Microscopy (International Cement Microscopy Association, 1991) p. 101.

16
Bentz, D.P., Garboczi, E.J., and Martys, N.S., "Application of Digital-Image-Based Models to Microstructure, Transport Properties, and Degradation of Cement-Based Materials," Computer Modelling of Microstructure and Its Potential
Application to Transport Properties, edited by H.M. Jennings (RILEM, Paris, 1995).

17
Jiang, S.P., Mutin, J.C., and Nonat, A., Cement and Concrete Research, 25 (4), 779-789, 1995.

18
Quiblier, J.A., J. Colloid Interface Sci., 98 (1), 84-102, 1984.

19
Bentz, D.P., and Martys, N.S., Hydraulic Radius and Transport in Reconstructed Model Three-Dimensional Porous Media Transport in Porous Media, 17 (3), 221-238, 1995.

20
Law, A.M., and Kelton, W.D., Simulation Modeling and Analysis (McGraw-Hill, New York, 1982) Chap. 7.

21
Bentz, D.P., Garboczi, E.J., Pimienta, P.J.P., Carter, W.C., "Cellular Automaton Simulations of Surface Mass Transport Due to Curvature Gradients: Simulation of Sintering," in Synthesis and Processing of Ceramics: Scientific Issues, 249 (Materials Research Society, Pittsburgh, PA, 1992) pp. 413-418.

22
Bullard, J.W., Garboczi, E.J., Carter, W.C., and Fuller, E.R., Numerical Methods for Computing Interfacial Mean Curvature, Comp. Mat. Sci., 4, 1-14, 1995.

23
Bentz, D.P., Coveney, P.V., Garboczi, E.J., Kleyn, M.F., and Stutzman, P.E., Modelling and Simulation in Materials Science and Engineering, 2, 783-808, 1994.

24
Mindess, S., and Young, J.F., Concrete (Prentice-Hall, Englewood, NJ, 1981).

25
Young, J.F., and Hansen, W., "Volume Relationship for C-S-H Formation Based on Hydration Stoichiometry," in Microstructural Development During Hydration of Cement, 235 (Materials Research Society, Pittsburgh, PA, 1986) pp. 313-322.

26
Fukuhara, M., Goto, S., Asaga, K., Daimon, M., and Kondo, R., Cement and Concrete Research, 11, 407-414, 1981.

27
Handbook of Chemistry and Physics, 63rd ed. (CRC Press, Boca Raton, FL, 1982).

28
Schwarz, W., Journal of Advanced Cement-Based Materials, 2, 189-200, 1995.

29
Jennings, H.M., and Parrott, L.J., Journal of Materials Science, 21, 4053, 1986.

30
Bentz, D.P., Martys, N.S., Stutzman, P.E., Levenson, M.S., Garboczi, E.J., Dunsmuir, J., and Schwartz, L.M., "X-ray Microtomography of an ASTM C109 Mortar Exposed to Sulfate Attack," in Microstructure of Cement-Based Systems/ Bonding and Interfaces in Cementitious Materials, 370 (Materials Research Society, Pittsburgh, PA, 1995) pp. 77-82.

31
Tzschichholz, F., Herrmann, H.J., and Zanni, H., "A Reaction-Diffusion Model for the Hydration/Setting of Cement", Phys. Rev. E, 53 (3), 2629-2637, 1996.

32
Parrott, L.J., Geiker, M., Gutteridge, W.A., Killoh, D., Cement and Concrete Research, 20, 919-926, 1990.

33
Powers, T.C., Industrial and Engineering Chemistry, 27, 790-794, 1935.

34
Olson, R.A., Christensen, B.J., Coverdale, R.T., Ford, S.J., Moss, G.M., Jennings, H.M., Mason, T.O., and Garboczi, E.J., "Microstructural Analysis of Freezing Cement Paste Using Impedance Spectroscopy", Journal of Materials Science, 30, 5078-5086, 1995.

35
Carino, N.J., Knab, L.I., and Clifton, J.R., "Applicability of the Maturity Method to High-Performance Concrete", NISTIR 4819, U.S. Department of Commerce, May 1992.

36
Knudsen, T., Cement and Concrete Research, 14, 622-630, 1984.

37
Filliben, J.J., "DATAPLOT: Introduction and Overview", NBS Special Publication 667, U.S. Department of Commerce, 1984.

38
Brown, P.W., Journal of the American Ceramic Society, 76 (12), 2971-2976, 1993.

39
Gaidis, J.M., and Gartner, E.M., "Hydration Mechanisms II", in Materials Science of Concrete II, edited by J.P. Skalny and S. Mindess (American Ceramic Society, Westerville, OH, 1991) p. 9.

40
Pratt, P.L., and Ghose, A., Phil. Trans. R. Soc. London, A310, 93-103, 1983.

41
Knudsen, T., personal communication, 1991.

42
Pommersheim, J.M., "Effect of Particle Size Distribution on Hydration Kinetics," Mat. Res. Soc. Symp. Proc. Vol. 85, (Materials Research Society, Pittsburgh, PA, 1987) p. 301.

43
Radjy, F.F., and Vunic, D.W., "Heat Signature Testing of Concrete," in Proceedings of Structural Materials Technology- An NDT Conference, Atlantic City, 1994.

44
Lu, P., Sun, G.K., and Young, J.F., Journal of the American Ceramic Society, 76, 1003-1007, 1993.


Next: Graphs for Fit of Up: Main Previous: Acknowledgments