Up: Main Previous: Acknowledgements
References
- 1
-
D.P. Bentz, D.A. Quenard, V. Baroghel-Bouny, E.J. Garboczi, and H.M. Jennings,
"Modelling Drying Shrinkage of Cement Paste and Mortar: Part 1. Structural Models from
Nanometers to Millimeters", Materials and Structures 28, 450-458 (1995).
- 2
- N.J. Carino and J.R. Clifton, "Prediction of Cracking in Reinforced Concrete
Structures," NISTIR 5634, U.S. Department of Commerce, April 1995.
- 3
- G.W. Scherer, "The Theory of Drying", Journal of the American Ceramic Society,
73 (1), 3-14, 1990.
- 4
- E.A. Flood and R.D. Heyding, "Stresses and Strains in Adsorbent-Adsorbate
Systems," Canadian Journal of Chemistry, 32, 660-82, 1954.
- 5
- D.J. C. Yates, "The expansion of porous glass on the adsorption of non-polar gases",
Proc. Roy. Soc. London A224, pp. 526-544 (1954).
- 6
- J.K. Mackenzie, "The elastic constants of a solid containing spherical holes," Proc.
Phys. Soc. 683, 2-11 (1950).
- 7
- M.A. Biot , "General theory of three-dimensional consolidation," J. Appl. Phys. 12,
155-164 (1941); D.L. Johnson, "Elastodynamics of gels," J. Chem. Phys. 77, 1531-1539 (1982).
- 8
- G.W. Scherer, "Dilatation of Porous Glass," Journal of the American Ceramic
Society, 69 (6), 473-80, 1986.
- 9
- C.H. Amberg and R. McIntosh, "A Study of Absorption Hysteresis by Means of
Length Changes of a Rod of Porous Glass", Canadian Journal of Chemistry, 30, 1012-32, 1952.
- 10
- D.P. Bentz and N.S. Martys,
"Hydraulic
Radius and Transport in Reconstructured Model Three-Dimensional Porous
Media", Transport in Porous Media, 17 (3), 221-38, 1995.
- 11
- P.A. Crossley, L.M. Schwartz, and J.R. Bavanar, "Image-Based Models of Porous
Media: Application to Vycor Glass and Carbonate Rocks", Applied Physics Letters, 59 (27),
3553-55, 1991.
- 12
- J.W. Cahn, J. Chem. Phys., 45, 93, 1968.
- 13
- W. Haller, "Rearrangement kinetics of the liquid-liquid immiscible microphases in
alkali borosilicate melts," J. Chem. Phys., 42, 686-693 (1965).
- 14
- L. Monette, G.S. Grest, and M.P. Anderson, "Three-Dimensional Ising System with
Long-Range Interactions: A Computer Model of Vycor Glass", Phys. Rev. E, 50 (5), 3361-3369,
1994.
- 15
- P. Levitz, G. Ehret, S.K. Sinha, and J.M. Drake, "Porous Vycor Glass: The
Microstructure as Probed by Electron Microscopy, Direct Energy Transfer, Small-Angle
Scattering, and Molecular Adsorption", Journal of Chemical Physics, 95, 6151-61, 1991.
- 16
- J.G. Berryman, "Measurement of Spatial Correlation Functions Using Image
Processing Techniques", Journal of Applied Physics, 57 (7), 2374-84, 1985.
- 17
- N. Cressie, Statistics for Spatial Data (John Wiley and Sons, Inc., New York,
1991), Ch. 2.
- 18
- J.A. Quiblier, "A New Three-Dimensional Modeling Technique for Studying Porous
Media", Journal of Colloid and Interface Science, 98 (1), 84-102, 1984.
- 19
-
P.J.P. Pimentia, W.C. Carter, and E.J. Garboczi,
"Cellular Automaton Algorithm for
Surface Mass Transport Due to Curvature Gradients: Simulations of
Sintering", Computational Materials Science, 1, 630-7, 1992.
- 20
-
D.P. Bentz, P.J.P. Pimientia, E.J. Garboczi, and W.C. Carter,
"Cellular Automaton
Simulations of Surface Mass Transport Due to Curvature Gradients: Simulations of Sintering in
3-D", in Synthesis and Processing of Ceramics, edited by W.E. Rhine, T.M. Shaw, R.J.
Gottschall, and Y. Chen, Mater. Res. Soc. Proc. 249, pp. 413-8 (1992).
- 21
-
J.W. Bullard, E.J. Garboczi, W.C. Carter, and E.R. Fuller,
"Numerical methods for
computing interfacial mean curvature," Comp. Mater. Sci.
4, 1-14, 1995.
- 22
-
E.J. Garboczi and D.P. Bentz,
"Digitized simulation of mercury intrusion
porosimetry," in Advances in Cementitious Materials, edited by S. Mindess, Ceram. Trans. 16,
365-380 (1991).
- 23
- D.A. Quenard, D.P. Bentz, and E.J. Garboczi, "Capillary condensation, hysteresis,
and image analysis," Proceedings of the International Drying Symposium, 1992.
- 24
- J.A. Lewis, M.A. Galler, and D.P. Bentz, "Computer simulation of binder removal
from 2-D and 3-D model particulate bodies," J. Amer. Ceram. Soc. 79, 1377-1388 (1996).
- 25
- R. Badmann, N. Stockhausen, and M.J. Setzer, "The Statistical Thickness and the
Chemical Potential of Adsorbed Water Films", Journal of Colloid and Interface Science, 82 (2),
534-42, 1981.
- 26
- J. Hagymassy, Jr., S. Brunauer, and R. Sh. Mikhail, "Pore structure analysis by
water vapor adsorption," J. Colloid Interface Sci. 29, 485-491 (1969).
- 27
-
T. Sneck and H. Oinonen, "Measurements of pore size distribution of porous
materials," Julkaisu 155 Publication (State Inst. Techn. Res., Helsinki, Finland, 1970).
- 28
-
B.K. Peterson and K.E. Gubbins, "Phase transitions in a cylindrical pore: Grand canonical
Monte Carlo, mean field theory, and the Kelvin equation," Mol. Phys. 62, 215-226 (1987).
- 29
-
C. Lastoskie, K.E. Gubbins, and N. Quirke, "Pore size distribution analysis of microporous
carbons: A density function approach," J. Phys. Chem. 97, 4786-4796 (1993).
- 30
-
R. Evans, "Fluids adsorbed in narrow pores: phase equilibria and structure," J. Phys.:
Condens. Matter 2, 8989-9007 (1990).
- 31
-
P. Tarazona, U. Marconi, and R. Evans, "Phase equilibria of fluid interfaces and confined
fluids: Non-local versus local density functionals," Mol. Phys. 60, 573-595 (1987).
- 32
-
R. Evans, in Liquids at Interfaces (Les Houches Session XLVIII), edited by J. Charvolin, J.
Joanny, and J. Zinn-Justin (Elsevier, Amsterdam, 1990).
- 33
-
P.C. Ball and R. Evans, "Temperature dependence of gas adsorption on a mesoporous solid:
Capillary criticality and hysteresis," Langmuir 5, 714-723 (1989).
- 34
-
N.A. Seaton, "Determination of the connectivity of porous solids from nitrogen sorption
measurements," Chem. Eng. Sci. 46, 1895-1909 (1991).
- 35
- H. Salle, D.A. Quenard,
and J.P. Laurent, "Developpement d'un analyseur
hygrogravimetrique automatique pour produit hygroscopique," Recents Progres en Genie des
Procedes, Conduite et Commande des Procedes - Grenoble 93,
Lavoisier Technique et
Documentation, 7 (29), 263-68, 1993.
- 36
- D.H. Bangham and N. Fakhoury, "The Swelling of Charcoal I,", Proc. Roy. Soc.
A130, 81 (1930); D.H. Bangham, N. Fakhoury, and A.F. Mohamed, "The Swelling of Charcoal
II," Proc. Roy. Soc. A138, 162 (1932); D.H. Bangham and N. Fakhoury, "The Swelling of
Charcoal III," Proc. Roy. Soc. A147, 152 (1934); D.H. Bangham and N. Fakhoury, "The
Swelling of Charcoal Iv," Proc. Roy. Soc. A147, 175 (1934).
- 37
- W. Hansen, "Drying Shrinkage Mechanisms in Portland Cement Paste", Journal of
the American Ceramic Society, 70 (5), 323-28, 1987.
- 38
- R.K. Iler, The Chemistry of Silica (J. Wiley and Sons, New York, 1979), pp. 645-
647.
- 39
-
E.J. Garboczi and A.R. Day,
"An Algorithm for Computing the Effective Linear
Elastic Properties of Heterogeneous Materials: 3-D Results for Composites with Equal Phase
Poisson Ratios", J. Mech. Phys. of Solids 43, 1349-1362 (1995).
- 40
- R.D. Cook, D.S. Malkus, and M.E. Plesha, Concepts and Applications of Finite
Element Analysis (J. Wiley, New York,1989).
- 41
- S. Torquato, "Random Heterogeneous Media: Microstructure and Improved
Bounds on Effective Properties," Appl. Mech. Rev. 44 (2), 37-76 (1991).
- 42
-
C.M. Neubauer, H.M. Jennings, and E.J. Garboczi,
"A three-phase model of the
elastic and shrinkage properties of mortar," J. Adv.
Cem.-Based Mater. 4, 6-20 (1996).
- 43
-
E.J. Garboczi and D.P. Bentz,
"Analytical formulas for interfacial transition zone
properties," J. Adv. Cem.-Based Mater. 6, 99-108 (1997).
- 44
-
E.J. Garboczi,
"Finite element and difference codes for computing the linear
electrical and elastic properties of digital images of random materials,"
National Institute of
Standards and Technology Internal Report, (1998).
- 45
- R.M. Christensen, Mechanics of Composite Materials (Krieger Publishing
Company, Malabar, FL, 1991), Chapter 2.
- 46
- B.W. Rosen and Z. Hashin, "Effective thermal expansion coefficients and specific
heats of composite materials," Int. J. Engng. Sci. 8, 157-173 (1970).
- 47
- P. Levitz, and D. Tchoubar, "Disordered Porous Solids: From Chord Distribution to
Small Angle Scattering," J. Phys. I France, 2, 771-90, 1992.
- 48
-
E.J. Garboczi, M.F. Thorpe, M. DeVries, and A.R. Day,
"Universal conductivity
curve for a plane containing random holes," Phys. Rev. A 43,
6473-6482 (1991).
- 49
- J.N. Roberts and L.M. Schwartz, Phys. Rev. B 31, 5990-6000 (1985).
- 50
-
N. Martys and E.J. Garboczi,
"Length scales relating the fluid
permeability and electrical conductivity in random two-dimensional model
porous media," Phys. Rev. B 46, 6080- 6090 (1992).
- 51
-
E.J. Garboczi and D.P. Bentz,
"Computer simulation of the diffusivity of cement-
based materials," J. Mater. Sci. 27, 2083-2092 (1992).
- 52
- M.J. Graf, C.A. Huber, T.E. Huber, and A.P. Salzberg, "Indium-impregnated
porous glass: Magnetotransport and superconductign transition," in MRS Proc. Vol. 195
Physical Phenomena in Granular Materials, edited by G.D. Cody, T.H. Geballe, and P. Sheng,
pp. 397-402.
- 53
- M.J. Graf, T.E. Huber, and C.A. Huber, "Superconducting properties of indium in
the restricted geometry of porous Vycor glass," Phys. Rev. B 45, 3133-3136 (1992).
- 54
- D.G. Cahill, R.B. Stephens, R.H. Tait, S.K. Watson, and R.O. Pohl, in
Proceedings of the 21st International Thermal Conductivity Conference (Plenum, New York,
1990), p.3.
- 55
- L.M. Schwartz, N. Martys, D.P. Bentz, E.J. Garboczi, and S. Torquato, "Cross
property relations and permeability estimation in model porous media," Phys. Rev. E 48, 4584-
4591 (1993).
- 56
- P. Debye and R.L. Cleland, "Flow of liquid hydrocarbons in porous Vycor," J. Appl.
Phys. 30, 843-849 (1959).
- 57
- M.Y. Lin, B. Abeles, J.S. Huang, H.E. Stasiewski, and Q. Zhang, "Viscous flow
and diffusion of liquids in microporous glasses," Phys. Rev. B 46, 10701-10705 (1992).
- 58
- M.E. Nordberg, "Properties of some Vycor-brand glasses," J. Amer. Ceram. Soc.
27, pp. 299-305 (1944).
- 59
- A.J. Katz and A.H. Thompson, Phys. Rev. B 34, 8179-8182 (1987); A.J. Katz and
A.H. Thompson, J. Geophys. Res. 92, 599 (1987); A.H. Thompson, A.J. Katz, and C.E. Krohn,
Adv. Phys. 36, 625 (1987).
- 60
- A.R. Day, K.A. Snyder, E.J. Garboczi, and M.F. Thorpe, "The elastic moduli of a
sheet containing circular holes," J. Mech. Phys. Solids 40, 1031-1051 (1992).
- 61
- E.J. Garboczi, "
Analytical and computational aspects of surface energy-induced strain in models of porous materials," to be submitted to Proceedings of the Royal Society of London (2001).
- 62
- J.G. Berryman, J. Acoust. Soc. Am. 68, 1809-1819 (1980).
- 63
- R.W. Zimmerman, "Behavior of the Poisson ratio of a two-phase composite
material in the high-concentration limit," Applied Mechanics Reviews 47, S38-S44 (1995).
- 64
- T. Mori and K. Tanaka, "Average stress in matrix and average elastic energy of
materials with misfitting inclusions," Acta. Metall. 21, 571-574 (1973).
- 65
- L.D. Landau and E.M. Lifshitz, Theory of Elasticity (Pergamon Press, Oxford,
1986), p. 12.
- 66
- Z. Hashin, "Analysis of composite materials: A survey," J. Appl. Mech. 50, 481-
505 (1983).
- 67
- R.C. Weast, editor, CRC Handbook of Chemistry and Physics (CRC Press,
Cleveland, 1976), p. F-80.
- 68
- G.W. Scherer, "Sintering inhomogeneous glasses: Application to optical
waveguides," J. Non-Crys. Solids 34, 239-256 (1979).
- 69
- G.W. Scherer and M.G. Drexhage, "Stress in leached phase-separated glass," J.
Am. Ceram. Soc. 68, 419-426 (1985).
- 70
- K.H. Hiller, "Strength Reduction and Length Changes in Porous Glass Caused by
Water Vapor Adsorption", Journal of Applied Physics, 35 (5), 1622-28, 1964.
- 71
-
G. Mason, "The effect of pore space connectivity on the hysteresis of
capillary condensation in adsorption-desorption isotherms,"
J. Colloid Interface Sci. 88, 36-46 (1982).
Up: Main Previous: Acknowledgements