1) Anter Laboratories, Inc., Transmittal of Test Results, report to NIST, 2004.
2) ASTM Annual Book of Standards; ASTM International: West Conshohocken, 2004.
3) CRC Handbook of Chemistry and Physics, 68th Edition; CRC Press: Boca Raton, 1987.
4) Smith JM, Van Ness HC. Introduction to Chemical Engineering Thermodynamics; McGraw-Hill Book Co.: New York, 1975.
5) Thomas G. Fire Mater. 2002; 26:37.
6) Taylor HFW. Cement Chemistry; Thomas Telford: London, 1997.
7) Hansen PF, Hansen J, Hougaard KV, Pedersen EJ. "Thermal Properties of Hardening Cement Paste," Proc. RILEM Int. Conf. on Concrete at Early Ages; RILEM: Paris, 1982, p. 23.
8) Flynn DR. "Response of High Performance Concrete to Fire Conditions: Review of Thermal Property Data and Measurement Techniques,” NIST GCR 99-767, U.S. Department of Commerce, March 1999.
9) Gustafsson SE. Rev. Sci. Instrum. 1991; 62:797.
10) Log T, Gustafsson SE. Fire Mater. 1995; 19:43.
11) Russell HW. J. Amer. Ceram. Soc. 1935; 18:1.
12) Frey S. Z. Elektrochem. 1932; 38:260.
13) Bruggeman DAG. Ann. Der Phys. 1935; 24:636.
14) Loeb AL. J. Amer. Ceram. Soc. 1954; 37:96.
15) Holman JP. Heat Transfer; McGraw-Hill Book Co.: New York, 1981.
16) Bentz DP, Mizell S, Satterfield S, Devaney J, George W, Ketcham P, Graham J, Porterfield J, Quenard D, Vallee F, Sallee H, Boller E, Baruchel J, "The Visible Data Set," J. Res. NIST 2002; 107:137.
17) Garboczi EJ. "Finite Element and Finite Difference Programs for Computing the Linear Electric and Elastic Properties of Digital Images of Random Materials," NISTIR 6269, U.S. Department of Commerce, December 1998.
18) FEMA 403, "World Trade Center Building Performance Study: Data Collection, Preliminary Observations, and Recommendations," Federal Emergency Management Administration, Washington, DC, May 2002.
19) Standard for Durability Tests for Fire Resistive Materials Applied to Structural Steel, UL 2431, Draft 1.1, Underwriters Laboratories Inc., Northbrook, IL, 2003.
20) Low NMP. "Material Degradation of Thermal Insulating Mineral Fibers," Thermal Insulation: Materials and Systems, ASTM STP 922, F.J. Powell and S.L. Matthews, Eds., American Society for Testing and Materials: Philadelphia, 1987; p. 477.